banner
 
  Home >> Blogs >> How to Prevent Solar LED Street Lights from Dying?

this user is offline now  xiuxiu
Send message

Subscribe
Gender: Female
Status:
Age: 24 Years

City:
State:
Country: China


Signup Date: 01/07/2019

Categories:

Archive:
November 2019
October 2019
September 2019
August 2019
July 2019
June 2019
May 2019
April 2019
March 2019
February 2019
January 2019

Who Gives Kudos:





 

12:02 PM   [16 Jun 2019 | Sunday]

How to Prevent Solar LED Street Lights from Dying?

The light source of solar street light is basically using led light source. This kind of street light is also called solar led street light. However, in the process of use, we often encounter the situation that the LED is not bright. This is the dead light phenomenon of the Solar led street light(CLASSIC).

There are two reasons for the death of the light. One is that the leakage current of the solar led street light is too large, causing the local dead light caused by the PN junction failure, and the whole light work is not affected. Second, the internal connection lead of the solar led street light is disconnected, resulting in LED No current is passed through and a dead light is generated, causing the whole light to not work properly. So how to avoid this phenomenon?

First, prevent static electricity

Static electricity is a very harmful devil for solar led street light. Any problem in one link will cause damage to the LED, making the LED performance deteriorate or even fail.

We know that the human body (ESD) static electricity can reach about three kilovolts, which can damage the LED chip. In the LED packaging production line, a scientific and standardized grounding design must be designed. Generally, the grounding resistance is required to be 4 ohms. The grounding resistance should even reach ≤ 2 ohms.

Second, try to use automatic welding equipment

If manual soldering is used, the soldering temperature must be strictly controlled. This is because manual soldering is used. If a normal soldering iron is used, the soldering iron temperature is above 300-400 °C. Excessive soldering temperature can also cause dead lights.

The solar led street light lead has a coefficient of expansion several times higher than the expansion coefficient at about 150 ° C. The internal gold wire solder joint will open the solder joint due to excessive thermal expansion and contraction, resulting in a dead light phenomenon.

If you are ready to upgrade to a more efficient lighting system, for more information, please click Led street lights Manufacturers.

Mood: Solar led street light
- 0 Comments - 0 Kudos - Add comment 

  Comments
 
|
|
|
|
|
 
Copyright © 2009 - 2012 True2ourselves. All rights reserved.
Reproduction in whole or in part in any form or medium without express written permission is prohibited.