banner
 
  Home >> Blogs >> Steel structure building is one of the important parts of the construction industry

this user is offline now  putian
Send message

Subscribe



Categories:

Archive:
October 2019
September 2019
August 2019
July 2019
June 2019
May 2019
April 2019
March 2019
February 2019
January 2019

Who Gives Kudos:



 

  

Steel structure building is one of the important parts of the construction industry

Steel structure is a structural composed of steel materials, which is one of the main building structure types. Steel structure warehouses installation quickly , the structure is mainly composed of steel beams, steel columns, steel trusses and other components made of shaped steel and steel plate, etc., and usually welded, bolted or riveted joints are used between each member or component , because of its light weight and simple construction, is widely used in large factory buildings, venues, super high-rise and other fields.

1. Before the steel structure is installed, all kinds of records and reports should be checked, such as quality certificate of components, material test report, non-destructive inspection report of welding seam, etc., and the appearance of components should be checked to see if they conform to the design requirements, and the problems should be corrected immediately.

2. The installation flow chart of the steel structure is drawn and installed according to the flow chart. The precision of all anchor bolts should be checked before installation, and the spatial position and design drawing should be corrected timely to ensure the accuracy of anchor bolts.

3. The mounting sequence of the components should be carefully designed to form a rigid body as soon as possible so that the installation can be continued in a stable state, and also to eliminate errors in the installation of the steel structure.

4. Component assembly should undertake the necessary checking calculation. The lateral stiffness of small component measures should be taken to avoid the distortion and damage.

5. In the process of columns or steel structure installation, beam and steel support should be installed in a timely manner, temporary fixed cable wind rope should be added when necessary.

6. It should pay attention to controlling the influence of temperature difference on the perpendicularity of components for the installation of steel column, adjust the lateral quantity to the perpendicularity of the first determined standard column, and check other columns.

7. When the column is installed, the positioning axis of each column must be directly drawn from the control axis on the ground, and the top axis of the column of the next column shall not be used as the positioning axis of the upper column.

8. Steel structure installation spot welding environment, welding position, high altitude, air temperature and humidity adverse effects for susceptible to weld defect, therefore, must take appropriate measures to overcome the impact of these unfavorable factors. The unqualified weld rework repair is not allowed to exceed twice.

9. High strength bolts using torque wrench must be correction calibration before use, should check after use, once found that the torque error exceed the permitted range, the twist of the wrench bolt were all unqualified.

The high-strength bolts should be tested after final screw, and the nuts can be tested one by one by means of small hammering. Torque should also be sampled check.

10. After the Steel structure installation is completed, and correct after correction, it should do the second grouting in time for the space between the column bottom and top of the base to make sure the surface contact base plate and foundation top tight.

11. After completion of the whole steel structure installation, it should be according to “the steel structure engineering construction quality acceptance standard “(GB 50205-2001) requirements for acceptance.

PTH has over 20 years of experience in this industry, and can provide full services to customers’ requirements covering design, manufacturing, logistic, installation, and after sales service.

If you want to know more, you can click here: https://www.pthhouse.com/

Mood:
- 0 Comments - 0 Kudos - Add comment 

  Comments
 
|
|
|
|
|
 
Copyright © 2009 - 2012 True2ourselves. All rights reserved.
Reproduction in whole or in part in any form or medium without express written permission is prohibited.