How to Extend The Service Life of Rice Destoner Equipment
After the Rice Destoner(LIANGGONG) equipment is started, it is not allowed to disassemble or inspect any part inside the machine. Various tools must not be randomly placed on the machine. The operator is not allowed to wear gloves to operate. When feeding, it should stand on the side of the rice destoner machine, pay attention to the operation of the rice destoner machine at any time, and the feeding amount should be kept uniform. It is strictly forbidden to operate for a long time. It is strictly forbidden to change the speed of the rice destoner. The rotation speed of the rice destoner is generally allowed to differ from the rated speed by 8% to 10%. When the rice destoner is working with a larger power machine, care should be taken to control the flow rate and make the flow uniform, so that it cannot be suddenly and slowly.
After the end of each day's work, the machine should be cleaned in time to check the looseness of the screws in each part and the wear of the wearing parts such as the claws and sieves. After the machine parts are found to be damaged or severely worn, repair or replacement parts should be repaired in time. The repaired rotor should be checked for dynamic balance. When the sieve of the rice destoner is worn or broken by foreign matter, if the damage area is not large, it can be repaired by riveting or soldering. If the area is damaged, the new sieve should be replaced.