banner
 
  Home >> Blogs >> How to Detect Paddy Cleaner Equipment

this user is offline now  lianggong
Send message

Subscribe
Gender: Female
Status:
Age: 25 Years

City:
State:
Country: China


Signup Date: 11/09/2018

Categories:
  Jobs, Work, Careers

Archive:
March 2020
February 2020
January 2020
December 2019
November 2019
October 2019
September 2019
August 2019
July 2019
June 2019
May 2019
April 2019
March 2019
February 2019
January 2019
December 2018
November 2018

Who Gives Kudos:





 

12:36 PM   [29 Nov 2018 | Thursday]

How to Detect Paddy Cleaner Equipment

1. The normal boot test Paddy Cleaner(LIANGGONG) machine:

After the engine is running normally, the test runs from 1st to 2nd, and 3rd and then reversed. Check the steering mechanism and turn to the left and right respectively. Processing equipment brakes, interlocking mechanism, clutch is sensitive and reliable, clutch separation is thorough, feel the shift is light, the instrument is running normally, if there is any abnormality, stop running the processing equipment and eliminate the fault immediately. The time for trial rotation is generally mastered: reverse gear 10 minutes, 3 gear 20 minutes, 1 gear 30 minutes, 2 gear 30 minutes.

2. Test paddy cleaner equipment engine:

During the commissioning process, pay attention to the temperature gauge of the oil pressure gauge and the oil, and whether the water temperature gauge is stable within the specified range. Listen carefully to the sound of the engine when the processing equipment is running, and observe whether there is abnormal noise. If there is abnormal sound, stop it in time and troubleshoot it.

3. Remember to check the condition of each component after one round of trial paddy cleaner equipment:

Check for loose fasteners, bushings, bearings with signs of heat, belts and chains that are loose and worn, heat out the engine oil sump, gearbox, lubricant in the reduction gear and hydraulic tank Hydraulic oil and thoroughly clean the filter at each part.

4. Check the paddy cleaner equipment separation, cutting, threshing, unloading and other working institutions commissioning:

The sequence of operations in sequence should be small throttle, medium throttle, large throttle, first partial, and then fully carried out. Paddy cleaner equipment manufacturers said that they should pay more attention to whether the operation of each part is normal, whether there is noise, whether the hydraulic components and monitoring instruments are moving freely, stable and reliable. Once the problem is found, stop the test immediately and continue testing.

Click Rice Destoner to learn about more information.

Mood: Paddy Cleaner
- 0 Comments - 0 Kudos - Add comment 

  Comments
 
|
|
|
|
|
 
Copyright © 2009 - 2012 True2ourselves. All rights reserved.
Reproduction in whole or in part in any form or medium without express written permission is prohibited.