banner
 
  Home >> Blogs

this user is offline now  xiuumin
Send message

Subscribe



Categories:

Archive:
October 2020
September 2020
August 2020
July 2020
June 2020
May 2020
April 2020
March 2020
February 2020
January 2020
December 2019
November 2019
October 2019
September 2019
August 2019
July 2019
June 2019
May 2019
April 2019
March 2019

Who Gives Kudos:



 

  

The Precision Requirement of Table Mould Is Relatively High

If a manufacturer wants to ensure that all products are exactly the same when mass-producing various products, then it must adopt moulds for production at this time, so they also need to find some professional mould design and manufacturing manufacturers. In order to provide their customers with high-quality molds, these manufacturers will also continuously introduce some new design and manufacturing technologies. For the current Table Mould field, What are the design and manufacturing techniques used? If you are a practitioner of this industry, you must have a thorough understanding of this knowledge. Let's look at the details.

First, casting processing

Most people should be familiar with the casting process, or to some extent, most people think that all table moulds are produced by the casting process. In fact, in the process of mould design and manufacturing, this production and manufacturing process is not very suitable now, because it may lead to the poor thermal conductivity of table moulds, thus affecting the production efficiency of using the molds. The most important thing is that through this casting process, it may also affect the strength and hardness of steel.

Second, cutting

For those table dies that must have certain excessive round corners, the cutting process can be adopted in the production process, because it can effectively ensure that the corners have certain radians. Of course, for this process, it also has certain defects. For example, in the process of processing, stress concentration is likely to occur due to too small a radius, which further damages the materials used. In addition, it may also cause the appearance of this die to look too rough after processing, which is also a more important aspect.

Third, grinding

This is a table mould design and manufacturing process that is often used at present because for this production process, it can effectively improve the quality and level of the table mould. The most important thing is that some molds have relatively high requirements for precision, especially for the smoothness of the table mould surface. Therefore, in this case, in some cases with relatively high requirements, this tool can be used to complete the table mould design and manufacturing work. However, when applying this process, more measures are needed to avoid overheating or cracks.

Fourth, EDM

In fact, for the vast majority of table mould manufacturers, in the process of designing and manufacturing various moulds, EDM technology seems to be more and more popular because of the relatively high precision requirements for table moulds. After all, when controlling EDM through numerical control technology, it can achieve higher precision and at the same time ensure a certain smoothness of the surface. However, when applying this mould design and manufacturing technology, it is also necessary to ensure that the operators have a certain technical level, or that this technology has certain requirements for the technical level.

For more product details, please click on our official website: https://www.furnituremould.com/

Mood: Table Mould
- 0 Comments - 0 Kudos - Add comment 
 
|
|
|
|
|
 
Copyright © 2009 - 2012 True2ourselves. All rights reserved.
Reproduction in whole or in part in any form or medium without express written permission is prohibited.